🎯 Context


Last lesson you saw what limits the size of a population, from nest holes for nuthatches to lichen for the reindeer of St Matthew Island. Every one of those stories depends on a number: how many individuals there are. This lesson is about how ecologists get that number when they cannot count every individual.

You will choose a sampling strategy for different investigations, estimate the size of a plant population from random quadrats, and estimate the size of an animal population by capture–mark–release–recapture and the Lincoln index. By the end you should be able to work out each estimate and explain when it can be trusted.

Sampling strategies


<aside> <img src="/icons/leaf_green.svg" alt="/icons/leaf_green.svg" width="40px" />

2.1.15 Population abundance can be estimated using random sampling, systematic sampling or transect sampling.

Consider reasons for selecting which of these procedures would be most appropriate.

</aside>

Ecologists can rarely count every individual in a population. Instead they sample: they count in a few small areas and use those counts to estimate the whole. A sample is only useful if it is representative of the whole area, and how you choose where to sample decides whether it is.

The choice depends on the question. To estimate how many plants there are in a whole area, sample at random. To find out how they change across a gradient, use a transect.

[4 September 2015]

[4 September 2015]

1. Choose the most appropriate sampling strategy for each investigation and give your reason. Fill in the table.

Investigation Strategy Reason
Estimating how many dandelions grow on the school playing field
Finding out how plant cover changes with distance from a busy footpath on the Salève
Finding out how lichens change from the base of a tree trunk to 2 m up it
Mapping where wild garlic grows across a whole wood, evenly, in one afternoon

Quadrats for non-mobile organisms


<aside> <img src="/icons/leaf_green.svg" alt="/icons/leaf_green.svg" width="40px" />

2.1.16 Random quadrat sampling can be used to estimate population size for non-mobile organisms.

Percentage cover is an estimate of the area in a given frame size (quadrat) covered by the plant or animal in question. Percentage frequency is the number of occurrences divided by the number of possible occurrences. For example, if a plant occurs in 5 out of 100 squares in a grid quadrat, then the percentage frequency is 5%. Percentage cover and frequency give an estimate of abundance but not actual population size. Application of skills: Use quadrat sampling estimates for abundance, population density, percentage cover and percentage frequency for non-mobile organisms and measures change along a transect.

</aside>

Plants, and animals that stay put such as barnacles, can be sampled with a quadrat: a frame of known area, often 1 m × 1 m or 0.5 m × 0.5 m. Placed at random coordinates, quadrats give four measures.

Only density lets you estimate population size: multiply the number per m² by the area of the habitat. Percentage cover and percentage frequency estimate abundance, but not actual population size. They tell you how much of the ground a species occupies, not how many individuals there are.

The more quadrats you place, the more reliable your mean. Placed at intervals along a transect, quadrats show how density or cover changes along a gradient.

[4 June 2019]

[4 June 2019]

2. Explain why percentage cover and percentage frequency give an estimate of abundance but not of population size.

<aside> 🧮

Worked example 1: population size from random quadrats (the numbers in the clip)

Step 1. Measure the area. 31 m × 20 m = 620 m².

Step 2. Sample at random. 10 quadrats of 1 m², placed at random coordinates, held 70 daisies in all.

Step 3. Find the mean per quadrat. 70 ÷ 10 = 7 daisies per quadrat.

Step 4. Turn it into density. Each quadrat is 1 m², so 7 ÷ 1 = 7 daisies per m².

Step 5. Scale up. 7 × 620 = 4,340 daisies in the field.

If your quadrat is 0.5 m × 0.5 m, its area is 0.25 m². A mean of 2 per quadrat is then 2 ÷ 0.25 = 8 per m².

</aside>

<aside> 🧮

Worked example 2: percentage cover and percentage frequency from one quadrat (example numbers)

A 1 m² quadrat is divided into 100 squares. Moss fills 18 squares completely and about half of each of 14 more.

Percentage cover. 18 + (14 × ½) = 25 squares' worth of moss. 25 ÷ 100 × 100 = 25% cover.

Percentage frequency. Moss occurs in 18 + 14 = 32 of the 100 squares. 32 ÷ 100 × 100 = 32% frequency.

The same quadrat gives two different numbers, because they measure different things.

</aside>

3. A class placed ten 0.5 m × 0.5 m quadrats at random on a 1,200 m² school field and counted the dandelions in each. Work out: (a) the mean number per quadrat; (b) the population density per m²; (c) the estimated number of dandelions on the field; (d) the percentage frequency of dandelions in the ten quadrats. Show your working under the table.

Quadrat 1 2 3 4 5 6 7 8 9 10
Dandelions 3 0 5 2 4 1 6 2 3 4

4. A student says the moss in worked example 2 has a percentage cover of 32%, because it appears in 32 of the 100 squares. Explain the mistake.

Capture–mark–release–recapture


<aside> <img src="/icons/leaf_green.svg" alt="/icons/leaf_green.svg" width="40px" />

2.1.17 Capture–mark–release–recapture and the Lincoln index can be used to estimate population size for mobile organisms.

Consider use of the Lincoln index in estimating population size. Population size estimate = (M × N) / R, where M is the number of individuals caught and marked initially, N is the total number of individuals recaptured and R is the number of marked individuals recaptured. Application of skills: Students should use the Lincoln index to estimate population size. Students should understand the assumptions made when using this method.

</aside>

Animals that move cannot be counted in quadrats: they leave before you finish, or arrive after you start. For mobile organisms, ecologists use capture–mark–release–recapture.

1. Catch a sample and count it: M.

2. Mark every animal in a way that does it no harm, and release each one where it was caught.

3. Wait long enough for the marked animals to mix back into the population.

4. Catch a second sample and count it: N. Count how many of these carry a mark: R.

The idea is simple. If a quarter of the second sample is marked, the marked animals are probably about a quarter of the whole population. The Lincoln index turns that into a number:

Population size estimate = (M × N) ÷ R

The estimate is only as good as the assumptions behind it.

When an assumption fails, the estimate is biased: too high or too low, in a direction you can work out.

Field missions on Revise